You may come across a situation where you find yourself having to tag a recording when the shotclock is not running. For example during a practice, between 2 phases or during a timeout.
By default, the options are set as below. They are accessible via the Settings tab: simply select the button No running shotclock tags to fall into the following screen:
By Default, if you tag up to 4 seconds after the end of a phase, this tag will be added to that respective sequence automatically.
You can change the time by decreasing it or increasing it up to 20 seconds.
Late Tagging - Early Tagging
As mentioned in the article describing tags, you can change the duration of the sequences created when you add a tag while no shotclock is running (tags linked to shotclock phases have a delimited length that is not editable as they are defined by the length of the phase).
For both early tags and late tags, you can change the duration of them by sliding the borders to define the length before and after a tag, the sequence will start and stop.