Connecting a display and keyboard to your server

To connect a monitor and keyboard to your server, plug in your VGA monitor and USB keyboard in to the ports displayed in the picture below.

Restarting Your Server

In order to restart your server, you may locate the reset button on your server as displayed in the picture below and press for 5 seconds.

After a successful restart of your server, your monitor should display the following 

Should you monitor display the following message, there is disk array issue which you may resolve by using the following article. Disk Array Issue: Rebuild Array

PoE Injector

You may restart your PoE injector by unplugging the power cable as displayed in the picture below. Please leave the device unplugged for 10 seconds before plugging back in.

After your PoE injector has restarted, all the indicators lights on the top of the device should be solid green as the image above. If the lights are not solid green, there is likely an issue with the cabling for the cameras.

Server Cable diagram

The following image is a diagram of how your server's cabling should be connected.

The rear of your server will look as followed

Legend -

1. Power supply

2. Internet connection

3. Synchro cable

4. Synchro power supply

5. Camcourt1

6. Camcourt2

7. Camcourt3

8. Scoreboard camera

9. Sound input